The flattened end of a cosmetic tube is part of a manufacturing process, not simply a straight edge on a label. Placing fine text close to that area can leave the finished pack crowded or misaligned. Plan the sealed end with the tube supplier before approving the attractive front artwork or a matching adhesive label.
01
Ask for the tube drawing used by production
Labelprint24 directs tube customers to obtain the correct contour template for their selected tube. Use that principle with the supplier manufacturing your pack: request the actual artwork drawing rather than constructing a rectangle from nominal diameter and length. Ask which areas belong to decoration and which belong to the production process.
Name the sealed end, cap end and front panel explicitly in the brief. If a registration mark is required, ask who prepares it and where it must sit. Do not erase a technical mark because it looks unattractive or copy one from an unrelated tube. Its role must be understood by the people producing the pack.
02
Design the rear panel from the restricted edge inward
For an illustrative hand-treatment tube, write the full approved rear wording first and place it in the permitted area. Compare a layout with a generous gap near the sealed end against one that fills every available line. Keep a ruler alongside the actual-size proof so the difference is judged physically, not at a convenient screen zoom.
Reserve room for any variable information the business and production team intend to add. Discuss whether that information is printed before or after filling and how its location is controlled. The artwork designer should not assume an apparently blank strip is available for permanent text simply because it is empty on a marketing photograph.
| Review item | Decision to record |
|---|---|
| Sealed end | Supplier-defined restricted area |
| Registration mark | Required position and preparation owner |
| Rear wording | Clearance after sealing |
03
Review a sealed sample rather than only the flat file
Ask for a representative sample that shows the intended seal and artwork orientation. Examine both faces and the transition into the flattened end. Check whether words appear too close to the seal, whether a decorative border emphasizes small positional differences and whether the name faces the expected direction when the tube stands in its display.
If an adhesive label is planned instead of direct decoration, discuss its placement and construction separately. A stock that works on a rigid sample may not suit a filled tube that flexes. Keep the printer’s artwork acceptance and the packaging supplier’s physical approval connected to the same model and sample reference.
04
Preserve the production exclusions through revisions
Store the approved drawing beside the editable design and make restricted areas clear on the working file. Before exporting clean artwork, remove any temporary guide that the printer does not want to print. Keep a marked review copy so later editors can understand why seemingly spare space was deliberately left unused.
When changing fill quantity, tube length, cap or supplier, ask whether the same decoration drawing still applies. Carry brand typography into the revised panel without assuming identical proportions. Editable label templates can support the visual work, but they do not define a tube’s sealing geometry or replace the manufacturer’s production preparation.
BEFORE YOUR NEXT STEP
Your practical checklist
- Request the production tube drawing.
- Identify sealing and registration exclusions.
- Reserve variable-information space.
- Approve a sealed representative sample.
Questions & answers
Is a tube crimp allowance the same for every supplier?+
No. Use the drawing and process requirements for the exact tube and filling arrangement.
Can a flat Canva preview verify the sealed end?+
It can show the intended wording and layout. A representative formed and sealed sample is needed to review the final physical presentation.
Sources & further reading
Official references for the technical points in this guide. Check current specifications before production.
