A candle tube looks like one continuous cylinder in a mockup, but the physical package has several boundaries. Its lid lifts away, its body may have a visible paper seam and the label itself has a meeting point. These boundaries need separate names in the artwork brief. Otherwise a centered logo can end up divided when the customer opens the tube.
01
Name the tube components on a flat sketch
CandleScience offers paper candle tubes in different sizes and finishes. Use the specific selected tube, including its matching lid, rather than treating the product category as one universal circumference. Measure the stable body panel and identify where the lid overlaps or meets the lower section.
For an illustrative kraft tube, draw a simple side view showing BODY, LID and BREAK. Add a separate mark for any visible construction seam. These labels make it possible to discuss the package precisely with a printer without assuming that the tube seam and the applied label seam must occupy the same location.
02
Choose where the label ends should meet
Wrap a blank paper strip around the approved panel and mark the proposed meeting point. Place the main title away from that point and check the rear information in its normal reading direction. A small gap and a planned overlap are different layouts; ask the converter which is appropriate to the chosen construction.
Print a paper version containing the actual longest scent name. Rotate the tube slowly and note where the title disappears from view. If important wording crosses the meeting point, rearrange the panel rather than relying on an application worker to achieve an exact visual match at every join.
| Proof item | Record |
|---|---|
| Identify body and lid boundaries. | Exact supplier or artwork reference |
| Mark the label seam position. | Observation on the assembled sample |
| Read the opened components. | Approved change or acceptance |
03
Review the lid as a separate piece
Open the tube and set its lid beside the body. Check which identity remains on each part and whether the graphic creates an unintended half-word or broken instruction. A deliberate decorative continuation can look attractive, but essential content should not become understandable only when the lid is aligned perfectly.
If a label bridges the lid break, describe the intended opening behavior and ask the packaging supplier to approve it. Do not assume that a decorative bridge provides tamper evidence. Compare that option with separate body and lid identifiers, keeping any required information connected to the appropriate component.
04
Retain closed and opened proof views
Photograph the accepted tube from its front and label seam, then photograph it opened. Record the distance from the body label to the lid break using the supplier’s accepted placement reference. This avoids slowly moving artwork upward until it interferes with the opening during later batches.
Keep the tube model and applied-label dimensions with the editable master. A coordinated design can provide the visual style while the tube and its printed construction remain separate purchases. Reproof a replacement tube even if its advertised height sounds identical; the lid relationship and usable panel may have changed.
BEFORE YOUR NEXT STEP
Your practical checklist
- Identify body and lid boundaries.
- Mark the label seam position.
- Read the opened components.
- Save the exact tube reference.
Questions & answers
Can one wrap cross the tube lid?+
Only use an opening arrangement approved for the selected construction. A decorative crossing is not automatically a suitable closure.
Must the label seam match the tube seam?+
There is no universal visual rule. Compare the real surface, application method and reading panels with the packaging and label suppliers.
Sources & further reading
Official references for the technical points in this guide. Check current specifications before production.
